top of page
Search

The evolution of DGU glass processing machines

7 hours ago
6 min read

From Manual Operations To Connected Production Lines,

Automation Has Transformed How Insulating Glass Is Made


Advances in machinery, controls and data analysis have improved production consistency, reduced manual effort and opened new possibilities for intelligent insulating glass manufacturing.


When we look at a modern DGU (Double Glazing Unit) production line, it is easy to forget how different insulating glass production was in the past. Today, we see automatic glass washing, spacer bending, automatic positioning, gas filling, pressing and sealing robots working together as one production line. The operator mainly monitors the process, adjusts parameters and handles situations when something goes wrong. But it was not always like this. I think the best way to understand the development of DGU machines is to look at how the work has changed over the years.


1. In the beginning, the operator was the machine

In the early days of insulating glass production, there was a lot of manual work.

  • Glass had to be handled by operators at almost every stage.

  • Spacers were measured and prepared manually.

  • Desiccant was filled manually

  • The spacer was assembled with the glass by hand.

  • Sealing was largely dependent on the operator


The quality of the final unit depended heavily on the experience of the person doing the job.

A skilled operator could produce very good insulating glass, but maintaining the same quality throughout a large production shift was difficult.

This was one of the main reasons manufacturers started looking for better machines.


2. The first step was not full automation

The development did not happen overnight.

First came machines that helped operators with individual processes.

  • Automatic glass washing: Reduced manual cleaning work.

  • Conveyor systems: Made glass movement easier

  • Pressing machines: Reduced manual effort.

  • Spacer processing machines: Made cutting and bending more accurate.


These machines did not completely remove the operator from the process, but they made the operator’s job easier and, more importantly, made production more consistent.



This was the beginning of the transition from operator-controlled production to machine-controlled production.


3. Then the production line started working as one system

One of the biggest changes came when individual machines were connected together. Instead of washing glass on one machine, moving it manually to another machine, assembling the spacer and then transferring it again for pressing, manufacturers started developing complete automatic IG lines.

This was a major change. The glass could enter the line and automatically move through different stages of production.


PLC control became an important part of this development:

  • Sensors detected the position of the glass.

  • The PLC determined which operation needed to happen next.

  • The control system coordinated the machines.

  • The next machine started at the appropriate time.


For me, this is one of the most interesting parts of machine development.

The machine was no longer just doing a mechanical job. It was beginning to make decisions based on information from the production process.


4. Spacer processing also changed dramatically

Spacer preparation is another good example.

Previously, spacer bars were measured, cut and prepared manually. With automatic spacer bending machines, dimensions could be entered into the control system, and the machine could produce the required shape automatically.


Key benefits of automatic spacer processing: 

  • Improved production speed.

  • Increased dimensional accuracy.

  • Reduced differences between operators.

  • Improved consistency.

  • Better integration with the rest of the IG production process.


This improved both speed and accuracy while reducing one of the common problems in manual production: small dimensional differences between operators. Today, spacer processing can be integrated much more closely with the rest of the IG production process.



5. Sealing was another major revolution

If there is one area where automation has made a particularly visible difference, it is sealing. Manual sealing requires experience. The operator needs to maintain the correct sealant bead, speed and pressure, especially when moving around the corners.

Automatic sealing machines changed this.


Then came sealing robots. A modern sealing robot can:

  • Follow the complete perimeter of the glass unit.

  • Control movement around corners.

  • Regulate sealant delivery.

  • Maintain a consistent sealant bead.

  • Improve sealing consistency


But a sealing robot is not simply a machine that moves around the glass.

There is a lot happening behind that movement. The system has to know the dimensions of the unit, control the sealant flow, coordinate movement at the corners and maintain a consistent bead. Anyone who has worked with a sealing machine knows that the corners can sometimes tell you more about the machine than the straight sides.


6. Argon filling became part of the process

Another important development was the integration of gas filling. Argon is commonly used in insulating glass because of its thermal performance advantages. In older production methods, gas filling could be treated as an additional operation. Modern lines can integrate gas filling into the production process itself.


Benefits of integrated gas filling include:

  • Better process control.

  • Improved integration with assembly.

  • More consistent production procedures.

  • Better monitoring of gas-filling operations.


This means the manufacturer can have much better control over the complete unit instead of treating gas filling as something separate from assembly.


7. Sensors quietly changed everything

When people look at a DGU machine, they usually notice the glass, conveyors, motors and robots. But some of the most important components are the small sensors.


Sensors can monitor:

  • Glass position.

  • Glass thickness.

  • Glass movement.

  • Pressure.

  • Machine status.

  • Other operating conditions.


A modern machine may have dozens or even hundreds of signals being monitored.

This is something that is easy to underestimate. Without sensors, the PLC has very little information about what is actually happening.


The key difference:

  • Old machines: Moved because the operator told them to move.

  • Modern machines: Move based on information received by the control system and programmed logic that determines what should happen next.



8. Motors became smarter too

The development of VFDs and servo motors also changed DGU machinery. Older systems often had simple motor control. Today, speed can be controlled much more accurately.


Key improvements include:

  • VFDs: Allow smoother acceleration and deceleration.

  • Servo motors: Provide precise positioning and movement.

  • Improved motor control: Helps protect glass during handling.

  • Controlled movement: Reduces sudden acceleration and impact.


This is particularly important when handling glass.

Glass is strong in some directions but can be very sensitive to sudden movement and impact. Smooth machine movement can therefore be just as important as high speed. A faster machine is not necessarily a better machine if it cannot control the glass properly


9. From automation to intelligence

Now we are entering another stage. Modern machines are collecting more and more information.


Production data can include:

  • PLC data.

  • Motor current.

  • Machine alarms.

  • Production time.

  • Sensor status.

  • Other operating parameters.


This opens the door to what we often call Industry 4.0.

Imagine a machine that does not simply tell you that a motor has stopped. Imagine it telling you that the motor current has been gradually increasing for the last several weeks and that this could indicate a mechanical problem.


That is the difference between automation and intelligent manufacturing.

  • Automation: Does the job

  • Data analysis: Helps us understand the job.

  • Intelligent systems: Can potentially help us predict what will happen next.


10. What will the DGU machine of the future look like?

I don’t think the future is simply about making machines faster.


Speed is important, but there are other things that matter just as much:

  • Accuracy.

  • Reliability.

  • Energy consumption.

  • Glass protection.

  • Seal quality.

  • Gas-filling quality

  • Easy maintenance.

  • Production data.


The next generation of machines will probably combine all of these things.

Technologies likely to play an important role include:

  • Machine vision.

  • Robotics.

  • Advanced sensors.

  • PLCs.

  • Servo systems.

  • Artificial intelligence.

  • Production-management software.


These technologies will increasingly work together.

The operator will still be important, but the operator’s role will continue to change.

Instead of spending the whole day physically moving and positioning glass, the operator will increasingly monitor the line, manage production parameters and solve problems.


11. Looking back and looking forward

The history of DGU machines is really a history of reducing unnecessary manual work while increasing consistency.


The evolution can be summarised in five stages:

  • Manual production: Operators performed almost every task.

  • Machine assistance: Machines helped operators with individual processes.

  • Process automation: Machines began performing complete processes automatically.

  • Connected production lines: Individual machines became integrated into complete production systems.

  • Smart manufacturing: Machines began collecting data, communicating with other systems and potentially predicting problems.


That is a huge change.

But despite all the technology, the basic objective has not changed.


The main goals of DGU production remain:

  • Correct dimensions.

  • Proper spacer positioning.

  • Reliable sealing.

  • The required gas filling.

  • Consistent insulating glass quality.


The technology has simply given us better tools to achieve that goal. And from what I have seen working around these machines, the most interesting part is that the evolution is not finished yet.

The DGU machine of tomorrow will probably look very different from the machine we are operating today. And perhaps, one day, the most impressive machine will not be the one that runs the fastest.

It will be the one that can tell us why something is going wrong before we even notice it.


This article was written by Mr Mohit, lijiang after sales service manager.


 
 
 

Comments


bottom of page